美国税号

具体排除产品（英文版）

具体排除产品（中文参考版）

8412.21.0045

8430.31.0040

8607.21.1000

美国税号

具体排除产品（英文版）

具体排除产品（中文参考版）

8413.70.2004

Submersiblecentrifugal pumps，eachpowered by 36 v motor

潜水离心泵，毎台由36V电机供电

8413.81.0040

Breastpumps，whetheror not with accessories or batteries

吸乳器，不论是否带有配件或电池

8413.91.9095

Impellersof plastic designed for centrifugal pumps,each of the foregoingwith outside dianeter of 73 mm or more but not more than 74 mm.

铸铁叶轮外壳；为离心泵设计的塑料叶轮，上述每根外径为73毫米或以上但不超过74臺米

8413.91.9080

8414.90.4165

Compressorhousings designed for turbochargers

为涡轮增压器设计的压縮机壳体

8421.19.0000

Saladspinners，ofplastics，notelectrically powered

塑料沙拉旋转器，非电动

8421.21.0000

Machineryfor filtering water，submersible，poweredby batteries，manuallyoperated，suchmachinery designed for use in pools，basins，aquariums，spasor similar contained bodies of water；Machinerydesigned for removing waste from water in saltwater aquariums byinjecting air bubbles then filtering such bubbles；Electronicwater oxidizers designed for purifying water for household washingmachines；Hand-heldultraviolet water；purifiers，poweredby batteries。

过滤水，潜水器，电池供电，手动操作的机器，设计用于游泳池，水池水族馆，水疗池或类似水体；设计用于通过注入气泡然后过滤这些气泡来清除海水水族箱中的废水的机器；用于净化家用洗衣机水的电子水氧化器；由电池供电的手持式紫外线净水器

8421.22.0000

Filtersdesigned to remove sulfites from win

用于去除葡萄酒中亚硫酸盐的过滤器

8421.99.0040

Filterhousings，covers，orcouplings，theforegoing of steel and comprising parts of machinery or apparatusfor filtering liquids

过滤器外壳，盖子或联轴器，上述钢材，包括用于过滤液体的机器或设备部件

8428.32.0000

SteelL-shaped bucket elevator，eachcomprising steel buckets bolted to a steel chain with guide wiresand drive system

钢制L形斗式提升机，每个都包括用栓固定在钢上的钢制支架，带有导丝和驱动系统

8431.49.9095

Vulcanizedrubber tracks. each incorporating cords and cleats ofsteel，designedfor use on construction equipment

硫化橡胺履带，每根都包合钢丝绳和夹板，设计用于建筑设备

8439.91.9000

Rotorsdesigned to agitate paper and water into pulp，ofstainless steel，theforegoing comprising parts of machinery for making pulp of fibrouscellulosic materials

设计用于将纸和水搅拌成不锈钢纸浆的转子，前述包括用于制造纤维状纤维素材料纸浆的机器部件

8471.70.6000

Automateddata processing storage units（otherthan magnetic disk drive units），notassembled in cabinets for placing on a table or similar place，notpresented with any other unit of a system

自动数据处理存储单元（磁盘驱动器单元除外），未组装在机柜中放置在桌子或类似场所，未与系统的任何其他单元一起提供

8479.10.0060

Bituminouspavers，self-propelled，eachwith a weight exceeding 14.9 metric tons but not exceeding 18.2metric tons，withworking width of 2.4m or more but not over 8.6m

自行式沥青摊铺机，每个摊铺机的重量超过14.9公吨但不超过18.2公吨，工作宽度为2.4米或以上但不超过8.6米

8481.30.9000

Checkvalves，ofacrylonitrile butadiene styrene（ABS），eachweighing 120 g or lesss，Checkvalves，ofplastics

丙烯腈-丁二烯-乙烯（ABS）止回阀，每个重120克或以下，塑料止回阀

8501.10.4020

Electricmotors，AC，permanentsplit capacitor type，eachin a housing with outside diameter of 84 mm or less，withoutput of 6W or more but not exceeding 16w

电动机，交流电，永久分高电容器型，每个都在外径为84毫米或以下的外売中，输出功率为6瓦或以上但不超过16瓦

8501.31.5000

DCmotors rated at 739.6 W，eachwith a housing with external diameter of 85 mm or more but notexceeding 90 mm and weight of 257 g or less

额定功率为739.6W的直流电机，每个外壳的外径为85mm或以上但不超过90mm，重量力257g或以下

8504.32.0000

Electricaltransformers，eachwith a power handling capacity rating of 1.8KVA，withexternal dimensions measuring approximately 13.3 cm by 12.7 cm by11.4 cm

电力変压器，每个的功率处理能力等级为1.8千伏安，外部尺寸约为13.3厘米×12.7厘米×11.4厘米

8515.11.0000

Batterypowered soldering irons or soldering guns，notover 18 cm in length

电池供电的烙铁或焊枪，长度不超过18厘米

8538.90.6000

Knosof injection molded plastics

注塑塑料旋钮

8539.90.0000

Molybdenumfoil filament assemblies，designedfor use in ultraviolet lamps

设计用于紫外线灯的钼箔灯丝组件

9013.80.7000

Thinfilm-transistor，lightemitting diode（LED）backlitflat panel liquid crystal display modules，eachwith an aluminum bezel and a video display diagonal measuring 113mm or more but not over 339 mm

薄膜晶体管，发光二极管（LED）背光平板液晶显示模块，每个都带有铝质边框和113毫米或以上但不超过339毫米的视频显示对角线

9014.80.2000

Depth-soundingapparatus with digital display，eachdesigned｛forinstallation in a 63.5mm hole in dashboard，designedfor recreational boating use

具有数字显示功能的深度测量设备,每个设计用于安装在仪表板的63.5mm

孔中，设计用于休闲划船用途

9018.90.7580

Restraintpacks designed for use with chest compressors，eachcontaining one torso restraint，consistingof a cotton strap which fastens with hook and loop fasteners tothe compressor，andone cover for a head stabilizer

设计用于胸部压缩机的约束包，每个包合一个躯干约束装置，包括一个用钩环紧固件固定在压缩机上的棉带和一个用于头部稳定器的盖子

9027.905650

Inoculatorsets of plastics，eachconsisting of a plate with multiple wells，adisplay tray，anda lid；whenassembled，theset measuring 105 mm or more but

notexceeding 108 mm in width 138 mm or more but not exceeding 140 mmin depth，and6.5 mm or less in thickness

接种器塑料组，每个塑料组有多个孔的板，一个展示托盘和一个盖子组成；组装时，该组件的宽度为105毫米或以上但不超过108毫米，深度为138毫米或以上但不超过140毫米，厚度为6.5毫米或以下

9031.80.8085

Tunersdesigned to clip onto musical instruments and indicate whether theinstrument is in tune

调音器设计用于夹在乐器上并指示乐器是否合格